Know exactly when your DPF regenerates — not after the fact.
A background alert app for BMW F/G-series diesel owners. Connects to your existing OBD-II Bluetooth dongle and reads your DME/DDE's own DPF status directly — no guessing, no invented thresholds.
Buy BIM DPF GUARD Try free for 14 daysReal-time soot mass
Live soot mass reading and a color gauge showing how close you are to a regeneration, right on the home screen.
Start & finish alerts
A notification (with sound) the moment regeneration actually starts, and another the moment it finishes — so you know when it's safe to end your trip.
Runs in the background
No need to keep the app open. It reconnects to your dongle automatically and keeps watching, even if your phone is in your pocket.
Works with your existing dongle
Uses a standard ELM327-compatible Bluetooth OBD-II adapter (e.g. Carista, Vgate vLinker) — no proprietary hardware to buy. See the FAQ for which adapters to avoid. See our adapter guide, with photos.
Here's exactly what happens: you're listening to music, and the moment a regeneration starts — BIM DPF GUARD alerts you, just like you're about to hear.
The app speaks 8 languages: English, Italian, German, French, Spanish, Romanian, Russian and Bulgarian. The voice alert automatically uses your phone's language, and you can customise the message and the notification sound.
Why finishing the regeneration matters
A DPF regeneration needs a stretch of uninterrupted driving to actually finish burning off the soot it has collected. Repeatedly cutting it short — engine switched off, or driving too slowly before it completes — can lead to real problems, including:
- Soot building up faster than the filter can clear it, meaning more frequent and more difficult regenerations
- In the worst cases, a costly forced cleaning or DPF replacement
- Among the more serious risks, diesel fuel diluting into the engine oil — a known consequence of repeatedly incomplete regenerations — which can cause significant engine damage
Knowing exactly when a regeneration is still in progress is the whole point of BIM DPF GUARD — so you can plan those extra few minutes on the road instead of interrupting it halfway.
A real example, from two real readings our app took from the engine control unit (DDE) of two Italian BMWs
At similar mileage (around 170,000 km in both cases), these two filters show a very different state: one car has accumulated about 26g of ash with over 170,000 km of estimated remaining life, the other more than 40g with just 82,000 km estimated — less than half. A key factor: ash in the DPF forms precisely during regeneration, as the incombustible residue of burned-off soot — so the more often a car regenerates (typically from short, repeated trips), the faster it accumulates ash relative to mileage. And that's exactly what we see here: the second car regenerates every 421 km on average, the first every 499 km.
As mentioned above, repeatedly cutting regenerations short — engine switched off, or driving too slowly before they finish — makes things worse still: the diesel fuel injected to complete it doesn't fully burn, and the excess can end up in the engine oil, with real potential for mechanical damage.
Having clear, real-time information about your DPF's state and ongoing regenerations is one of the important factors that helps extend the filter's life — and that's exactly what BIM DPF GUARD is for.
Which cars does it support?
BIM DPF GUARD reads data directly from your car's own diesel engine control unit (DDE), the same way tools like bimmer-tool or Carista do — not invented or estimated. Confirmed on BMW F/G-series models with the B47 (4-cyl) and B47D engine family, as well as the B57 (6-cyl) family. Older E-series models (e.g. E60/E61/E81/E90) are not currently supported — their DDE rejects the data-reading method this app relies on. Coverage is expanding as more real F/G-series cars get tested. Not sure which engine your car has? Check the linked Wikipedia pages above to see if it's a B47 or B57.
BIM DPF GUARD is read-only: it only asks your engine control unit for data, and never writes settings, clears fault codes or controls any function. It needs no jailbreak, no root and no modification of your car's software — just a Bluetooth OBD-II adapter and your phone.